Showing posts with label Mixed Media. Show all posts
Showing posts with label Mixed Media. Show all posts

Thursday, January 17, 2019

Mixed Media Roots and Wings Tag

Stretching my mixed media skills with this roots and wings tag. There's a new face on Instagram these days, Nomadic Soul Diaries! NSD presents us with a star-studded cast of designers, a rhapsody of sponsors, and mouth watering color schemes. Rush over to their insta for all the details!!!
 January's Challenge:
Create a tag any size/material
Use feathers
Main color must be blue
 I started with plain white cardstock 4x6". I used my favorite stencil and smooshed Nuvo Embellishment Mousse all over it. I used Aqua glaze medium to paint a journal card from my Gypsy Moments paper pack.
Strips of vintage lace peak out from either end of the journal card. Chipboard gears are stitched to the tag with gold braid. From the ends of the braid hang wings die-cut from cardstock and gold foiled paper. 
Although the wings should count as having used feathers, I added two pale blue feathers at the top. I crowned my Wings and Roots tag with a blue blossom and called it good.
Can't WAIT to see everyone's interpretation of this challenge!

Supplies:
Cardstock:Recollections
Journal Card:Canvas Corp 
Embellishment Mousse:Tonic Studios
Stencil:Kite
Wing Die:Spellbinders
Feather Die:X-cut
Flower:Prima
Chipboard:Creative Embellishments

Craft On!

~charity~

Friday, July 27, 2018

How To Make A Homecoming Layout With Best Glue Ever

The uneven surface on this homecoming layout was not an obstacle for Best Glue Ever. I adhered patterned paper, craft foam, and stickers right over all the little ridges. The result is a wonderfully messy page with great staying power!
~ Homecoming 2015 ~
The first layers on this page were made with Nuvo Embellishment paste and stencils. This created texture, depth, and an uneven surface. Best Glue Ever sticks to anything so I had no concerns.
I cut the photo mats at a 1/4" and a 1/2" larger than the photo and used BGE to layer them.
Thin stripes of BGE attached the photo to the layered mat.
The geometric diecut had very thin strips of paper but a No-Clog Writing Cap made it easy to add tiny dots of BGE to the paper. The die-cuts were placed on either side of the photo mat.
Foam tape is easily replaced with craft foam and BGE. I glued to squares to the back of the photo mat. It only take s a couple minutes to set and is so efficient to use.
More BGE adhered the photo mat cluster to the layout. 
A couple minutes to set and my photo was immovable, despite the uneven layers of mixed media. 
I adhered another geometric die-cut to the upper left corner. Once again the No-Clog Writing Cap gave me ultimate control and the ability to place only tiny dots on the paper.
I arranged the diecut onto the cardstock and mixed media surface then trimmed off the edge. 
My title was next, but I knew those alpha stickers would not adhere to the variety of surfaces. No worries, a couple drops of BGE and my title was secure. I used a strip of paper to keep the letters even.
A few stickers and my layout was complete. Best Glue Ever worked for every surface and material I used. ScraPerfect has BGE, No-Clog Writing Caps and a variety of other crafty tools.
Supplies:
Patterned Paper:Photo Play Paper, Fancy Pants
Stickers, Title:Studio Calico
Large Alpha:American Crafts
Mixed Media Paste:Tonic Studios
Stencils:Kite, TCW
Geometric Die:Spellbinders
Ink:Close To My Heart

Scrap On!

~Charity Hotrum~

Monday, July 9, 2018

How To Make Mixed Media Bubbles For Scrapbook Pages

Today I have a fun layout that is all about imagination and how to make mixed media bubbles for scrapbook pages. My two youngest children discovered this tree with above ground roots by the river. They lived 100 Adventures between those wooden arms. Even at 10 and 12 their imagination is going full tilt!
~ Adventure Is ~
To echo the water scene I used 49 and Market papers from the Sand and Sea collection. I fussy cut this giant jelly fish and popped it up with craft foam. Best Glue Ever holds the project together securely.
I created the bubbles with Drip Rings, a Memory Box stencil. I used Nuvo Embellishment Mousse in Lilac Lavender, Citrus Green, and Coastal Reef over the stencil. Nuvo Mousse dries quickly with plenty of texture and pliability.
 I used Close To My Heart watercolors to fill in the bubbles. The color palette is excellent and the water brush by the same company makes water painting a snap!

Today is reveal day for Lucy's new sketch. For the full reveal stop by
Supplies:
Cardstock:DCWV
Patterned Paper:49 and Market
Border Stickers:Echo Park, Bo Bunny
Alpha:Studio Calico
Tiny Type:Echo Park
Stencil:Memory Box
Mixed Media Paste:Tonic Studios
Watercolors:Close To My Heart

Scrap On!

~charity~

Friday, May 25, 2018

How To Make a Mixed Media Layout with Word Sticker Doilies

Today's project is a mixed media layout with doilies die-cut from word stickers. The Tattered Walls Kit from 123 Scrap With Me comes with a pack of Tim Holtz Idea-ology Clippings. I like the look of printed words so I have been scheming up ways to use the Clippings.
~ Big Adventure ~
 To begin with I placed TCW's Screen Print stencil on the center of BFS Tattered Walls: The Carolina Room patterned paper. I used Nuvo Embellishment Mousse:Toasted Almond to leave the image. I flipped the stencil over and pressed the excess mousse onto the upper left and lower right corners.
 The BFS:Mystic Wand Chipboard needed a bit of lustre. I brushed them with the Toasted Almond Mousse included in the kit. The product is a bit goopy so I used a tooth pick to clean out the intricacies. I also snipped off the tales of the wands so the chipboard would fit on my layout.
 In the upper left corner I layered a scrap of  with a bit of 7gypsies Architextures from the Library Junque pack, also from the kit. I added a chunk of the large Kaiser Craft Die-cut and topped it with a chipboard wand.
 The next part of the design looked ripe for a doily so I pulled out my Peachy Cheap doily dies. I pealed a chunk of Idea-ology Clippings stickers away from the sheet and placed them on cardstock. A few phrases were left behind so I re-inserted those.
 I cut two doilies from the cardstock/sticker mash-up. The die is rather intricate so it took several passes through my die-cut roller, but the final look is stunning.
 One of the doilies I placed to the left of the stenciled image. Mini pink flowers punched from BFS Tattered Walls:The Maid's Room are placed along the doily's edge. Bits and pieces from BFS Tattered Walls:Ephemera are clustered on the far edge of the doily to embellish the title:Big Adventure.
 The lower right corner is a scrap of BFS Tattered Walls:The Reading Room is sandwiched between tag and word Ephemera from BFS Tattered Walls. An accordion fold strip of paper and the second Mystic Wand over lay the cluster. Sitting on top like cherry is a pink rose, also from BFS.
 The second Clippings doily holds a cluster of ribbon, from the kit, two pink BFS roses, and a word circle from the Ephemera pack.
 This sweet conglomeration sits to the upper right of the stenciled image.
 The photos were my last addition. I cut them to 3x3 and matted them with scraps from the Tattered Walls kit. I wedged them diagonally into frames from the Ephemera pack.
 Beach Combing on a rocky shore is less romantic then a long sandy beach. It is full of drama, hard edges, and cold splashes. The neutral tones of the Tattered Walls Kit and the pops of pink mesh perfectly with the photos. Click on the link ^^^ to get your kit!
I flipped a sketch from Alda Stevens' for this layout.

Scrap On!

~Charity Hotrum~


Wednesday, May 23, 2018

How To Make An Industrial Grunge Layout


The Tattered Walls kit from 123 Scrap With Me has an Industrial Grunge edge to it, perfect for Mixed Media layouts. The combination of Nuvo Embellishment Mousse and TCW Stencil: Screen Print are perfect layered over the Blue Fern Studios papers. Stop by 123 Scrap With Me for a look at the kit. It begins shipping May 24th!

~ Challenge The World ~

The photo featured on this layout is my oldest daughter. She was going through a Jane Austen phase and needed a regency style gown to fulfill all her dreams. I agreed to assist with the sewing project on the condition I was permitted a photo shoot. An agreement was quickly made!
The base design for the layout is vertical strips of Blue Fern Studios papers. I used the Screen Print stencil and Lilac Lavender Nuvo Mousse on either edge of the large central strip. Using a binder punch I created a stencil with a piece of cardstock. I used it to create a line of circles from Coastal Surf Nuvo Mousse on the left side and Toasted Almond on the right.
The Tattered Walls kit includes an Architextures Junque Pack:Library. I cut the “door knob” vertically and used circle and hexagon cutting dies on the “tooled leather” piece. Doodling, a scattering of Ideaology phrases, and a twist of ribbon finish the photo frame.
Layering to the right of the photo includes a piece of Kaisercraft frame and more scattered phrases. I edged a scrap of BFS “The Library” with a postcard cut and inked. I slipped the dragonfly shape on the stencil under the edge of the frame. I used my finger tip to apply a thick layer of Nuvo Mousse in Toasted Almond.
I repeated the dragonfly and mousse process at the photos upper edge. The stencil retained some of the product so I patted it randomly across the layout. I machine stitched a line to the left of the photo, and added the drop light from the Architextures Junque Pack.
These are the items I used that are not found in the kit:thread, gel writer, circle and hexagon die, binder punch, grey cardstock doily.

Here is a look at the kit I received.
These three Nuvo Embellishment Mousse are my choice of kit Add-ons:
Coastal Surf
Citrus Green
Lilac Lavender


Scrap On!

~Charity Hotrum~


Saturday, April 14, 2018

Mixed Media Layout With Rainy Day Symbols

Today's creativity produced this Mixed Media layout that is rich in pink and rainy day symbols. I spent the weekend with a dear friend in rainy Tacoma. We had a fabulous time hanging out. Along the way we found this sign that defines the greatest quandary of all time!
~ Good Times ~
 To come up with my pink texture I mixed modeling paste and acrylic paint. I was very thrifty and used the back of a damaged photo for my palette. A butter knife served as my palette knife.
 I had to mix two batches of pink modeling paste. The first batch I spread thinly thru the honey comb frame. The second I used to fill the umbrella/rain boots silhouette. To add texture I used a produce netting. 
 My inspiration for this layout came from Laurel Seabrook's Inspired By blog. I choose the color, the friends having fun, and the rainy atmosphere for my prompts. This is the offered image: 
Along with the modeling paste I also did a lot of stitching. The burlap is stitched to the cardstock and the tabs are stitched onto the photo mat. The two pieces of cardstock are stitched together using a Sew Easy with a Loop-de-Loop attachment.
Supplies:
Patterned Paper:Blue Fern Studios
Modeling Paste:Liquitex
Acrylic Paint:Tattered Angels
Stencils:Peachy Cheap Die, Studio Calico, Memory Box
Brads and Tabs:Echo Park
Embroidery Thread:Prism
Sew Easy: WE R Memory Keepers

Craft On!

~Charity Hotrum~

Wednesday, October 11, 2017

How To Make a Fantastic Canvas with Brilliant Colors

In celebration of Mexican culture and childhood memories here is a how-to for a fantastic canvas with brilliant colors. During my teen years I lived in Texas. My family made various trips over the border and was invited to some amazing fiestas. During that time I was introduced to The Day of The Dead, a day to celebrate family members and friends that have passed on. It is a beautiful celebration of life and love. One symbol of that day is the sugar skull.
~ A Day To Remember ~
 I recently picked up a pack of stencils because of its fabulous skull and crossbones. Included was a sugar skull template. The idea for this wall decor was sparked!
 I applied a bit of Modeling Paste to this canvas with stencils. Then I was ready for COLOR! I spritzed on bright ink sprays and added metallic paint around the edge. Finally I decorated the skull with dots of glitter glue.
The Sugar Skull represents a very important day, so I needed a title to reflect that. I started with a strip of Rinea Foiled Paper in Glossy Violet. After decorating with flourish and heart stamps using Rinea Ghost Ink I was ready for words.
The letters are die-cut from Ebony Starstruck Rinea Foiled Paper. I punched the corners with a decorative punch and laced it to the canvas with twine.
Supplies:
Modeling Paste:Liquitex
Spray Ink:Ranger, Heidi Swapp
Alpha Die and Glitter Glue:Ranger
Acrylic Paint:Deco Art
Foiled Paper and Ghost Ink:Rinea
Stamps:Inkadinkado
Twine:Two Berry Creative
Corner Punch:Kreaxions

Scrap On!

~charity~